Powerbrick 10-in-1 Kit - 04 Soil Moisture Sensor

 Go back to Product Documents Navigation 

 Go back to Powerbrick 10-in-1 Documents Navigation 

 

 

This is a soil moisture sensor that detects the moisture level in soil, the reading is high when the soil is dry.

 

 

Precautions

  • If the sensor is not in use for a long time, please store in a dry container to prevent oxidation due to moisture.
  • A warning line is printed on the module, do not insert the sensor deeper than this line as this may cause damage to the circuitry.

 

Connecting the module

Connect the Environment Module to Armourbit with a 4Pin cable first, then connect the sensor to the module with a 3Pin cable.

 

 

MakeCode Coding Tutorial

 

Powerbrick Extension: https://github.com/KittenBot/pxt-powerbrick

Loading Extensions

Environment Module Blocks:

 

Detecting soil moisture

 

Sample Code Link

Makecode Tutorial Video

 

Extension Version and Updates

There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.

Makecode Extension Update

 

KittenBlock Coding Tutorial

 

Load Powerbrick Extension

Select Powerbrick from the hardware column.

 

Environment Module Blocks

 

Detecting Soil Moisture

 

Sample Code Download

 

FAQ

1:Why is there no reaction when I click the blocks?

Make sure you have connected the Micro:bit correctly and flash the firmware again.

 

 

If you have any question, please feel free to contact us at Discord, we will always be there to help.

 

KittenBot Team

 

 Go back to Product Documents Navigation 

 Go back to Powerbrick 10-in-1 Documents Navigation 

 

Leave a comment

Please note, comments must be approved before they are published