03 RGB Ring Makecode Quick Start

 Go back to Product Documents Navigation 

 Go back to Jacdac Kit A 

 

 

Introduction

 

  1. WS2812RGB
  2. Jacdac Port
  3. Jacdac Communication Indicators
  4. Product QR Code
  5. Jacdac Standard Through-holes

Preparation

1× MicroUSB Cable
1× MicrobitV2 (Has to be V2)
1× Jacdaptor
1× Cable
1x RGB Ring

Connection

PC-〉MicroUSB -〉MicrobitV2-〉Jacdaptor-〉Cable-〉RGB Ring

 

Go to the link below

https://makecode.microbit.org/

Create a new project

 

Connect to the WebUSB

 

Add the Jacdac extension

Extensions——Jacdac

 

Add the RGB Ring block

 

Write the program and download

 

Press A to start after successfully downloading the program

Press A following the micro:bit LED indications to start the program

 

Working Status

 

 

FAQ

Q1:Does this module support hot-swapping? Will hot-swapping damage the module?
A1: Yes it does support. Hot-swapping won't damage the module or the mainboard.

Q2:Does micro:bit V1.5 support Jacdac?
A2: No, it has to be V2 or versions over.

Q3:Why does Makecode not recognize the Jacdac module?
A3: Please download a blank program after loading the Jacdac extension.

Q4:Do I need to distinguish different ports for connecting modules?
A4: No, you don't need to. All ports can be used to insert any Jacdac modules.

 

If you have any question, please feel free to contact us at Discord, we will always be there to help.

 

KittenBot Team

 

 Go back to Product Documents Navigation 

 Go back to Jacdac Kit A 

 

Leave a comment

Please note, comments need to be approved before they are published.