 Go back to Product Documents NavigationÂ
 Go back to Meowbit Documents NavigationÂ
Â
With the BLE Wireless SD Module, we can use Meowbit to communicate with other devices such as Micro:bit.
Specifications
-
Chipset: nRF51822 ARM Cortex-M0
-
Frequency: 16Mhz
-
Dimensions: 24x21X3mm
-
Weight: 14g
-
Max distance: 10m
-
Working Voltage: 3.3V
-
Protocols: Wireless 2.4GHz, Bluetooth 2.4G
-
Wireless Mode Indicator (Green for 2.4GHz, Blue for Bluetooth)
-
Mode Toggle Switch
-
Compatible with SD Card slot
Installation Method
Installation: Insert the module into the SD Card Slot of Meowbit with the golden connectors facing towards you.
Removal: Slowly and carefully pull out the module from the slot.
Â
Mode Toggle
The button on the top of the module is for switching between modes.
Â
MakeCode Arcade Coding Tutorial
Load the extension for the wireless module
Wireless Extension: https://github.com/KittenBot/pxt-sdwireless
Loading Extensions
Â
Blocks for the wireless module
Â
MakeCode Arcade Error Message
This error message may appear in MakeCode Arcade when using the wireless module, this is simply because the emulator cannot emulate the wireless module. Please ignore and continue.
Â
Sending data
Data can be sent from Meowbit to the Micro:bit using the 2.4GHz radio.
Â
Meowbit Coding
Â
Microbit Coding
Pressing A or B on the Meowbit causes Micro:bit to display different icons.
Receiving data
Meowbit can also receive data from a Micro:bit using the 2.4GHz radio.
Meowbit Coding
Â
Microbit Coding
Pressing A or B on the Micro:bit causes Meowbit to display different text.
Â
Â
If you have any question, please feel free to contact us at Discord, we will always be there to help.
Â
KittenBot Team
Â
