Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation
This is a music module with a speaker and a microSD card slot, it is able to play MP3 files. It can be used as an MP3 player with the built-in buttons, or be used with an Armourbit.
Specification
- Voltage: 3V-5V
- Dimensions: 56mm X 24mm X 16mm
- Connector: 4Pin PH2.0
- Flash Card: microSD card, up to 32G, supports FAT32
- File Formates: MP3, WAV
- Buttons: Play, Previous, Next
- Uploading: Put the files onto the microSD card with a computer.
Precautions
- PowerBrick Kit set does not come with an SD Card.
- Music can only be played if there are music files on the SD Card.
- When installing the SD Card, push it into the slot until there is a click.
- To remove the SD Card, gently push the SD Card, the SD Card will be unlocked and can be taken out. Do not pull the SD Card from the slot without unlocking first.
Connecting the module
Connect the Music Module to Armourbit with a 4Pin cable.
MakeCode Coding Tutorial
Powerbrick Extension: https://github.com/KittenBot/pxt-powerbrick
MP3 Module Blocks
Playing an MP3 file
Choosing an MP3 file with a number
Choosing an MP3 file with a name
| File name can only contain alphabets and numerics, length cannot exceed 8 letters. |
Showing a pattern
Makecode Tutorial Video
Tutorial for daisy chaining and graphical editor
Daisy chaining creates a bigger screen.
Extension Version and Updates
There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.
KittenBlock Coding Tutorial
Load Powerbrick Extension
Select Powerbrick from the hardware column.
MP3 Module Blocks
Playing an MP3 file
Choosing an MP3 file with a number
Choosing an MP3 file with a name
| File name can only contain alphabets and numerics, length cannot exceed 8 letters. |
FAQ
1：Why is there no reaction when I click the blocks?
Make sure you have connected the Micro:bit correctly and flash the firmware again.
If you have any question, please feel free to contact us at Discord, we will always be there to help.
KittenBot Team
Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation
