Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation
This is an infra red line tracing module, it has 2 line tracing sensors. The LEDs on the back turn off when a black line is detected.
Details
Specification
- Voltage: 3V-5V
- Dimensions: 56mm X 24mm X 16mm
- Connector: 4Pin PH2.0
Precautions
- The module should be as close to the ground as possible.
- The ground or table must have a non-reflective surface.
Connecting the module
Connect the Line Trace Module to Armourbit with a 4Pin cable.
MakeCode Coding Tutorial
Powerbrick Extension: https://github.com/KittenBot/pxt-powerbrick
Line Trace Module Blocks
Tracing black lines
Extension Version and Updates
There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.
Makecode Tutorial Video
KittenBlock Coding Tutorial
Load Powerbrick Extension
Select Powerbrick from the hardware column.
Line Trace Module Blocks
Tracing black lines
FAQ
1：Why is there no reaction when I click the blocks?
Make sure you have connected the Micro:bit correctly and flash the firmware again.
If you have any question, please feel free to contact us at Discord, we will always be there to help.
KittenBot Team
Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation
