Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation
This module is used to get the temperature and humidity of the nearby environment. It can be used with the Soil Moisture or Water Level Sensors.
Details
Specification
- Voltage: 3V-5V
- Dimensions: 56mm X 24mm X 19mm
- Connector: 4Pin PH2.0, 3Pin PH2.0
- Temperature Range: 0-50°C, Accuracy ±2°C
- Humidity Range: 20-90%RH, Accuracy ±5%RH
- Sensor Value Return Range: 0-1023
Precautions
- This module cannot be placed underwater, doing so would cause a short circuit.
Connecting the module
Connect the Environment Module to Armourbit with a 4Pin cable.
MakeCode Coding Tutorial
Powerbrick Extension: https://github.com/KittenBot/pxt-powerbrick
Environment Module Blocks:
Reading the temperature
Reading the relative humidity
Makecode Tutorial Video
Extension Version and Updates
There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.
KittenBlock Coding Tutorial
Load Powerbrick Extension
Select Powerbrick from the hardware column.
Environment Module Blocks
Reading the temperature
Reading the relative humidity
FAQ
1：Why is there no reaction when I click the blocks?
Make sure you have connected the Micro:bit correctly and flash the firmware again.
If you have any question, please feel free to contact us at Discord, we will always be there to help.
KittenBot Team
Go back to Product Documents Navigation
Go back to Powerbrick 10-in-1 Documents Navigation
