Go back to Product Documents Navigation
Go back to KOI Documents Navigation
Go back to KOI Coding with MakeCode
From KOI v1.12.0 onwards, saving and loading a voice recognition model is supported.
Install an SD Card
The trained model will be stored on an SD card, without an SD card we won’t be able to save this model.
Running a Model
Load the KOI Extension: https://github.com/KittenBot/pxt-koi
Blocks for Voice Recognition:
Sample Program
Program Flow
1: Download the program to the Micro:bit.
2: Press A to record the first command. KOI’s screen will display green upon a successful record.
3: Press B to record the first command. KOI’s screen will display green upon a successful record.
| AI Camera has the capacity for 10 voice samples. |
4: Press A and B at the same time to save the model.
| The saved model must be in a .json format, or else it will not work. |
Sample Code
1. Voice Recognition Model Training(Firmware1.9.5_Extension0.5.7)
Extension Version and Updates
There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.
FAQ
Q1: There is no reaction after pressing the buttons on the Micro:bit.
A1: This is because KOI has a longer boot time than Micro:bit. When the power is turned on, Micro:bit has already ran the code for KOI initialization before KOI is ready.
Solution: Reset your Micro:bit after KOI has been turned on. (The trick is to let KOI power on completely before initialization.)
Q2: Does KOI work with 3V input?
A2: No, KOI only works with 5V.
Q3: KOI displays red everytime I try to record my command.
A3: The noise level hasn’t been calibrated, it is essential to run the block before voice recognition.
If you have any question, please feel free to contact us at Discord, we will always be there to help.
KittenBot Team
Go back to Product Documents Navigation