KOI - Voice Recognition Load Model(KOI v1.12.0)

 Go back to Product Documents Navigation 

 Go back to KOI Documents Navigation 

 Go back to KOI Coding with MakeCode 

 

From KOI v1.12.0 onwards, saving and loading a voice recognition model is supported.

Install an SD Card

The trained model will be stored on an SD card, without an SD card we won’t be able to save this model.

 

 

Using a Trained Model

 

Load the KOI Extension: https://github.com/KittenBot/pxt-koi

Loading Extensions

Blocks for Voice Recognition:

 

Sample Program

 

 

Program Flow

1: Download the program to the Micro:bit.
2: Press A to load the trained model.
3: Press B to recognize a voice command. KOI will display green upon a successful recognition.4: Micro:bit will display the tag of the recognized command.

 

Sample Code

1. Voice Recognition Model Loading(Firmware1.9.5_Extension0.5.7)

 

Extension Version and Updates

There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.

Makecode Extension Update

 

FAQ

Q1: There is no reaction after pressing the buttons on the Micro:bit.

A1: This is because KOI has a longer boot time than Micro:bit. When the power is turned on, Micro:bit has already ran the code for KOI initialization before KOI is ready.
Solution: Reset your Micro:bit after KOI has been turned on. (The trick is to let KOI power on completely before initialization.)

Q2: Does KOI work with 3V input?

A2: No, KOI only works with 5V.

Q3: KOI displays red everytime I try to record my command.

A3: The noise level hasn’t been calibrated, it is essential to run the block before voice recognition.

 

If you have any question, please feel free to contact us at Discord, we will always be there to help.

 

KittenBot Team

 

 

 Go back to Product Documents Navigation 

 Go back to KOI Documents Navigation 

 Go back to KOI Coding with MakeCode 

Leave a comment

Please note, comments must be approved before they are published