Future Board OS Operation Guide

FutureOS is the GUI developed for FutureBoard, its main function is to provide an interface to select which .py file to run.

FutureOS Functions:

  • Storing and selecting .py files from the SD Card.

  • 1-Click Airkiss

  • Checking Firmware Version

  • Factory Reset

Entering FutureOS

By default, FutureBoard runs main.py if it is found.

FutureOS can be entered by pressing A during the opening animation.

../_images/futureos1.png

../_images/futureos2eng.jpg

FutureOS Functions

Press A to go to the next option, press B to confirm.

Select

Select and run the .py files from the SD Card.

../_images/futureos3eng.jpg

Network

Various Networking options are here.

../_images/futureos4eng.jpg

About

Check the firmware version and MAC Address here.

../_images/futureos5eng.jpg

Factory Reset

Factory Reset and clear all files on SD Card.

../_images/futureos6eng.jpg

 

 

If you have any question, please feel free to contact us at Discord, we will always be there to help.

 

KittenBot Team

Leave a comment

Please note, comments must be approved before they are published