Future Board Firmware Updates
Kittenbot may periodically release firmware updates for the Futureboard to improve functionality and stability.
Updating the firmware of Futureboard
Download the firmware flashing tool.
Unzip the file.
Choose Factory Mode.
Select ESP32 Download Tool.
Unlock the UI.
Select the firmware file ending with .bin.
Make sure the memory address is 0x1000 and the check box is ticked.
Select the port where the Futureboard is connected and use a baud rate of 1152000, press start and wait.
Press the reset switch on the back of the Futureboard.
If the Futureboard says a reset is required, please refer to Futureboard Reset.
If you have any question, please feel free to contact us at Discord, we will always be there to help.