01 Slider Makecode Quick Start
- Jacdac port
- Jacdac Communication Indicators
- Slide Potentiometer (Slider)
- Jacdac Standard Through-holes
- Product QR Code
1× MicroUSB Cable
1× MicrobitV2 (Has to be V2)
Go to the link below
Create a new project
Connect to the WebUSB
Add the Jacdac extension
Add the Slider block
Write the program and download
Press A to start after successfully downloading the program
Press A following the micro:bit LED indications to start the program
When the voltage is at the lowest level
When the voltage is at the highest level
Q1:Does this module support hot-swapping? Will hot-swapping damage the module?
A1: Yes it does support. Hot-swapping won't damage the module or the mainboard.
Q2:Does micro:bit V1.5 support Jacdac?
A2: No, it has to be V2 or versions over.
Q3:Why does Makecode not recognize the Jacdac module?
A3: Please download a blank program after loading the Jacdac extension.
Q4:Do I need to distinguish different ports for connecting modules?
A4: No, you don't need to. All ports can be used to insert any Jacdac modules.
If you have any question, please feel free to contact us at Discord, we will always be there to help.