02 Rotary Button Makecode Quick Start

  • Jacdac

 Go back to Product Documents Navigation 

 Go back to Jacdac Kit A 

 

 

Introduction

 

  1. Jacdac port
  2. Jacdac Communication Indicators
  3. Rotary Encoder
  4. Jacdac Standard Through-holes
  5. Product QR Code

Preparation

1× MicroUSB Cable
1× MicrobitV2 (Has to be V2)
1× Jacdaptor
1× Cable
1x Rotary Button

Connection

PC-〉MicroUSB -〉MicrobitV2-〉Jacdaptor-〉Cable-〉Rotary Button

 

Go to the link below

https://makecode.microbit.org/

Create a new project

 

Connect to the WebUSB

 

Add the Jacdac extension

Extensions——Jacdac

 

Add the Rotary Button block

 

Write the program and download

 

Press A to start after successfully downloading the program

Press A following the micro:bit LED indications to start the program

 

Working Status

When the potentiometer is not rotated

 

When the potentiometer is rotated by 5 grids (20 grids per turn)

 

FAQ

Q1:Does this module support hot-swapping? Will hot-swapping damage the module?
A1: Yes it does support. Hot-swapping won't damage the module or the mainboard.

Q2:Does micro:bit V1.5 support Jacdac?
A2: No, it has to be V2 or versions over.

Q3:Why does Makecode not recognize the Jacdac module?
A3: Please download a blank program after loading the Jacdac extension.

Q4:Do I need to distinguish different ports for connecting modules?
A4: No, you don't need to. All ports can be used to insert any Jacdac modules.

 

If you have any question, please feel free to contact us at Discord, we will always be there to help.

 

KittenBot Team

 

 Go back to Product Documents Navigation 

 Go back to Jacdac Kit A 

 

Leave a comment

Please note, comments need to be approved before they are published.

SUBHEADING

Blog posts